ETC
®
Setup Guide
Net3 Wired Focus Remote
Net3 Wired Focus Remote Setup Guide Page 1 of 2 Electronic Theatre Controls, Inc.
Corporate Headquarters
3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA
Tel +608 831 4116
Fax +608 836 1736
London, UK
Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK
Tel +44 (0)20 8896 1000
Fax +44 (0)20 8896 2000
Rome, IT
Via Pieve Torina, 48, 00156 Rome, Italy
Tel +39 (06) 32 111 683
Fax +44 (0) 20 8752 8486
Holzkirchen, DE
Ohmstrasse 3, 83607 Holzkirchen, Germany
Tel +49 (80 24) 47 00-0
Fax +49 (80 24) 47 00-3 00
Hong Kong
Rm 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong
Tel +852 2799 1220
Fax +852 2799 9325
Service:
Web:
www.etcconnect.com
Copyright © 2012 ETC. All Rights Reserved.
Product information and specifications subject to change.
4250M2261
Rev A
Released 2012-06
ETC intends this document to be printed in its entirety.
Overview
The Net3 Wired Focus Remote (WFR) provides an advanced,
wired solution for remote control. Compatible with ETC Congo
©
Family, and Eos
©
Family consoles, this unit provides remote
access to frequently used console features such as dimmer and
channel checks, as well as update and record functions.
The WFR can connect to a console either via USB or Ethernet for
bi-directional communication. During operation, the system status
can be viewed on the LCD of the remote. Once a command is
completed, the remote displays status information on the LCD.
For connecting via Ethernet, the maximum length of network
cable that can be used is 100m from the WFR to the switch. This
maximum distance includes any wiring in the wall, if a wall outlet
is used.
The WFR can be powered either by Power over Ethernet (PoE) or via USB if PoE is not available.
Device Settings
To access the device settings, you will need to be in Setup mode.To get into Setup mode, press the [C]
button down while booting up.
Setup mode will give you several different options. Use the {Prev} / {Next} softkeys to navigate through
the options, and the side encoders to change the current option.The {Save} softkey will save your
settings, and a power cycle will be needed to startup normally. To cycle power on the WFR, unplug the
remote from its power source, which is either USB or Ethernet. Plug in again to restart.
Available options include:
• Screen Timeout - (screen saver timeout), when no key has been pressed for the specified amount
of time, the screen will black out. Timing options are 10 sec, 30 sec, 1 min, 5 min, 10 min, or 30
min.
• Sleep Timeout - (disconnect timeout) when no key has been pressed
for the specified amount of time, the device will disconnect. Timing
options are Always On, 1 min, 5 min, 10 min, or 30 min.
• Network Addressing Mode - Dynamic (DHCP) or Fixed (Manual).
• IP Address - (if addressing mode is Fixed), 10.101.xxx.xxx.
• Netmask Address - (if addressing mode is Fixed) 255.255.255.0, 255.255.0.0, or 255.0.0.0.
• Gateway Address - (if addressing mode is Fixed) should match the IP Address.
Note:
This guide illustrates basic setup procedures for the WFR. For more detailed
instructions and operation specific to your console, please refer to your console
user manual.
Note:
For CE compliance, you must use a STP Ethernet cable.
Sleep Timeout:
Prev
Default
Next Save
Always On
(7 pages)
(11 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals