Etc Source Four CE Zoom User Manual download pdf (Page 12)

10 • CE Source Four Zoom

English

Selecting the ﬁeld angle and focusing the beam

1. Press the locking lever push button and lift the locking lever to

unlock the focus dial. See

Figure 3

2. To reduce the ﬁeld angle, rotate the focus dial clockwise. To

enlarge the ﬁeld angle, turn the focus dial anticlockwise.

3. Once the desired ﬁeld angle is established, slide the focus dial

forward or backward to soften or sharpen the edge focus.

4. Once the ﬁeld and edge are established, press the locking

lever back into position until it locks.

Gel frame retaining clip

The gel frame holder is equipped with a spring-loaded retaining

clip that prevents gel frames and accessories from falling out of

the holder.

1. Release the retaining clip by pushing it sideways. The retaining

clip pops open. See

Figure 4

2. Insert the gel frame.

3. Press the retaining clip down until it locks.

Important:

Lock retaining clip before you use the luminaire.

Important:

Use only the CE Source Four Zoom Colour frame

(model number 407CF).

Gel notes

For best results, always use a high quality, high temperature color

medium. ETC does not guarantee performance with low

temperature, saturated color gels.

ETC's Source Four Zoom gel frame holder extender may help

increase your gel life. (Accessory catalogue number 400PGE3)

Contact ETC or your dealer for ordering information.

Figure 3

Locking lever

push button

Unlocked position

Light bafﬂe

Focus dial

Figure 4

Retaining clip

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 51 52

No comments

Etc Source Four CE Zoom User Manual Page 12