Etc Unison DRd Right IO Card Upgrade Kit User Manual download pdf

ETC

Installation Guide

Unison

DRd Right I/O Card Upgrade Kit

Right I/O Card Upgrade Kit Installation Page 1 of 4 Electronic Theatre Controls, Inc.

Corporate Headquarters



3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA



Tel +608 831 4116



Fax +608 836 1736

London, UK



Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK



Tel +44 (0)20 8896 1000



Fax +44 (0)20 8896 2000

Rome, IT



Via Pieve Torina, 48, 00156 Rome, Italy



Tel +39 (06) 32 111 683



Fax +44 (0) 20 8752 8486

Holzkirchen, DE



Ohmstrasse 3, 83607 Holzkirchen, Germany



Tel +49 (80 24) 47 00-0



Fax +49 (80 24) 47 00-3 00

Hong Kong



Rm 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong



Tel +852 2799 1220



Fax +852 2799 9325

Service:

(Americas) service@etcconnect.com



(UK) servic[email protected]



(DE) techserv-hoki@etcconnect.com



(Asia) [email protected]

Web:

www.etcconnect.com



Product information and specifications subject to change.

7186M2120



Rev A



Released 2014-05



ETC intends this document to be provided in its entirety.

Overview

The DRd Right I/O Upgrade kit is available to upgrade an existing DRd enclosure to be used with the

Unison Echo Architectural Control Processor.

Kit includes:

The DRd right I/O card and five 6-32 x .250 screws.

Required tools:

• No. 2 Phillips screwdriver

• Slotted screwdriver (optional)

Procedure

Preparation

Step 1: Turn off power to the DRd enclosure.

Step 2: Loosen screws on the module retention rail on the left side of the DRd enclosure and slide

the rail to the left.

Step 3: If installed, remove the Architectural Control Processor, Station Power Module, and at

least three dimmer modules from the lower portion of the dimmer enclosure to provide

work space inside the enclosure.

Step 4: Use a digital voltmeter and verify that power is off by checking voltages for all

combinations between the phase bars, neutral, and ground (earth).

Note:

The right I/O card in this upgrade kit maintains compatibility for all existing Paradigm

and SmartLink Architectural Control Processors.

WARNING:

Power must be turned OFF when you perform this procedure. Before service,

de-energize main feed to dimmer enclosure and follow appropriate Lockout/

Tagout procedures as described in NFPA Standard 70E.

It is important to note that electrical equipment such as dimmer enclosures can

present an arc flash safety hazard if improperly serviced. This is due to available

large short circuit currents on the feeders of the equipment. Any work on

energized equipment must comply with OSHA Electrical Safe Working

Practices.

WARNING:

Failure to disconnect all power to the DRd before working in the enclosure

could result in serious injury or death.

1 2 3 4

Summary of Contents

Page 1 - Installation Guide

ETC® Installation GuideUnison® DRd Right I/O Card Upgrade KitRight I/O Card Upgrade Kit Installation Page 1 of 4 Electronic Theatre Controls, Inc.Corp

Page 2 - ETC Installation Guide

ETC Installation GuideRight I/O Card UpgradeRight I/O Card Upgrade Kit Installation Page 2 of 4 Electronic Theatre Controls, Inc.Remove the existing I

Page 3

ETC Installation GuideRight I/O Card UpgradeRight I/O Card Upgrade Kit Installation Page 3 of 4 Electronic Theatre Controls, Inc.Install the new I/O C

Page 4

ETC Installation GuideRight I/O Card UpgradeRight I/O Card Upgrade Kit Installation Page 4 of 4 Electronic Theatre Controls, Inc.Step 6: Replace the d

Comments to this Manuals

No comments

Etc Unison DRd Right IO Card Upgrade Kit User Manual

Browse online or download User Manual for Equipment Etc Unison DRd Right IO Card Upgrade Kit. ETC Unison DRd Right IO Card Upgrade Kit User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Equipment Etc Unison DRd Right IO Card Upgrade Kit